LD ICOA 12, User Manual

Page: 6 / 52

6
DEUTSCH
ENGLISH
FRANCAIS
ESPAÑOL
POLSKI
ITALIANO
简体中文
繁體中文
A
USE AS A STAGE MONITOR
Thanks to the rotating high-frequency horn and the universal housing, the speakers can be used as fully-fledged floor monitors. Non-slip rubber
skids ensure stability. The monitor angle is 55°.
ROTATE THE TWEETER BY 90°
The high-frequency horn can be rotated through 90° for applications where the speaker is mounted horizontally or used as a floor monitor.
Take care when opening the speaker and rotating the high-frequency horn, in order to avoid damage to the speaker and injury to persons. Follow
each step of the instructions exactly. The manufacturer shall not be liable for any damage to devices or injury to persons resulting from improper
handling!
1. Disconnect all cables from the speaker.
2. Place the speaker in its slanted monitoring position, remove the front grille from the housing (5 x 2.5-mm internal hex screws on left and right of
the housing).
3. Loosen the 4 screws that secure the high-frequency horn (see figure A).
4. Carefully lift the horn and rotate it through 90°, taking care not to damage the tweeter driver cable.
5. Feed the tweeter driver cable into the retainer nut next to the securing lug and replace the horn in the retainers. Ensure that the cable is not
pinched.
6. Carefully secure the horn with the screws and re-install the front grille on the housing.