6
DANGER:
1. Do not install or operate the device near radiators, heat registers, stoves or other heat
sources. Make sure that the device is always installed in such a way that it is sufficiently
cooled and cannot overheat.
2. Do not place any sources of ignition such as burning candles near the device.
3. Ventilation openings must not be covered and fans must not be blocked.
4. Use the original packaging or packaging provided by the manufacturer for transport.
5. Avoid shock or shock to the device.
6. Observe the IP protection class and the environmental conditions such as temperature
and humidity according to the specification.
7. Devices can be continuously developed. In the event of deviating information on operat-
ing conditions, performance or other device properties between the operating instruc-
tions and the device labeling, the information on the device always has priority.
8. The device is not suitable for tropical climate zones and for operation above 2000 m
above sea level.
ATTENTION:
Connecting signal cables can result in significant noise interference. Make sure that devices
connected to the output are muted during plugging. Otherwise, noise levels can cause
damage.
ATTENTION HIGH VOLUMES WITH AUDIO PRODUCTS!
This device is intended for professional use.
The commercial operation of this device is subject to the applicable national regulations and
guidelines for accident prevention.
Hearing damage due to high volumes and continuous exposure: The use of this product can
generate high sound pressure levels (SPL) which can cause hearing damage. Avoid exposure to
high volumes.
SIGNAL TRANSMISSION VIA RADIO (e.g. W-DMX or audio radio systems, Bluetooth):
The quality and performance of wireless signal transmissions generally depends on the
environmental conditions.
Influence on the range and signal stability, for example:
• Shielding (e.g. masonry, metal structures, water)
• High radio traffic (e.g. strong W-LAN networks)
• Interference
• Electromagnetic radiation (e.g. LED video walls, dimmers)
All range specifications refer to free field use with visual contact without interference!
The operation of transmitters is subject to official regulations. These can vary from region to
region and must be checked by the operator before commissioning (e.g. radio frequency and
transmission power).
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCH
ENGLISH
