-
5
-
2. Control box (Short description)
-
With the help of the 1-6 rotary buttons for setting the ball place
it is possible to set such 6 different
places (points) along the latitude of the table, where we would like the robot to place the balls. For example:
Ball 1
⇒
middle, Ball 2
⇒
left, Ball 3
⇒
right, Ball 4
⇒
right … Like it is shown on the drawing.
-
Ball designator press-buttons (+) (-)
Selecting the number of the placing points
- Buttons for setting the spin and display:
Ball spin level setting and feedback
- Buttons for setting the speed and display:
Ball speed level setting and feedback
- Buttons for setting the sidespin and display:
Ball sidespin level setting and feedback
- Buttons for setting the ball traject. and display:
Ball trajectory level setting and feedback
- Rotary button for setting the ball frequency C
ontrol. the ball frequency approx. 0-100 ball/min
- Rotary button for selecting memory place:
Selecting 11 possible memory places
- Press-button for selecting memory and for saving
Saving in memory (pushing it for long) and
(MEMORY Select/save)
activating the memory place (pushing it for short)
-
Button for Random function and display LEDs
Switch on/off of two types of random functions
- AFC switch button and display LED
Switch on/off of the automatic frequency control
- Button helping the setting (Backstep)
Buttons for stepping back from the actual balls
- Button helping the setting (Sample)
Giving actual balls while it is continuously pushed
(during making the setting). It has two functions:
1. Keeping it pushed the robot gives continuously the actual ball which can be set in the meantime.
2. Pushing it shortly – independent of the stage of the Ball/min button – it gets in „stop” position (the red
light starts to flash). Now it is possible to change any of the sets. Pushing it again shortly the ball feeding
starts if the „Ball/min” is not is „0” position.
Buttons for
setting sidespin
and
display
Buttons for
setting spin and
display
Buttons for
setting speed and
display
Up and
down button
for
setting ball
trajectory
and display
Ball designator
press-button
Ball designator
press-button (+)
1-6 rotary buttons
for
setting ball
place
Press button for selecting
memory
and for saving
1-6 yellow LEDs for
showing the
desiganted
balls
Rotary button
for selecting
memory place
Rotary
button for
setting ball
frequency
Buttons
helping the
setting
Button for Random
function and
display
LEDs
Button for AFC
and display
LED
