LT3100 Operating Sheet – Issue 4
This meter is a coin/token operated electronic timer for the control of leisure based electrical appliances, e.g. lighting,
solarium.
Switch on power
On power up the meter will briefly show ‘Pxx.x’ then the credit remaining on the meter.
To operate meter
Insert coin/token. The display will briefly show ‘Coin’. The display will then show the remaining credit. If the credit is
greater than one hour it will be displayed in hours & minutes, e.g.; 2 hours will be displayed as ‘02:00'. If the credit is
less than one hour it will be displayed in minutes & seconds, e.g.; 40 minutes will be displayed as ‘40:00' and an
indicator will flash on the display to show this.
Collector functions
Resettable Money (Token) Counter
When the coin box becomes full, the message ‘COLL’ (collect) is displayed.
Upon removal of the coin box the display will automatically show the resettable money counter. This will show how
much money has been inserted into the meter since the last collection.
When the coin box is reinserted, the money counter will automatically zero before displaying the remaining credit.
Note: To prevent the money counter from zeroing, insert the coin box with ‘B’ pressed.
Service Mode
To access service mode remove the coin box, press and release switch ‘B’ until the display changes to ' St.01 '.
The service mode consists of 10 settings.
01
Credit per coin/token
(HH.MM.SS)
02
Credit per coin/token
(HH.MM.SS)
03
Total money
(Read only)
04
Total credit
(Read only)
05 Pre-start
(MM.SS)
06
Run-on
(MM:SS)
07 Pre-end
(MM.SS)
08 Maximum
Credit
(HH.MM.SS)
09
Totalise value
(£’s & Pence)
10
Totalise credit value
(HH:MM)
Press and release ‘B’ to step to the desired setting number.
When the required number is showing on the display press and release ‘A’ to display the current setting. Press and
