Rev: 05.25.21
Page 3
CCD-0004221
Fig. 1
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause
death, serious personal injury, severe product and/or property damage if not performed safely and
within the parameters set forth in this manual.
Failure to follow instructions provided in this manual may result in death, serious personal injury
and/or severe product and property damage, including voiding of the component warranty.
Moving parts can pinch, crush or cut. Keep clear and use caution.
Tire Linc LCD Display Components
Callout
Part Number
Description
A
2020222357
TPMS handheld display
B
2020222358
TPMS handheld display power cord
C
2020222360
TPMS handheld display stand
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
e.g., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage,
including voiding of the LCI limited warranty.
A
B
C
Key System Components
Sensors
- 188 psi maximum pressure reading, -20 to 85 °C (-4 to 185 °F) temperature measurement range.
Repeater
- Receives sensor data.
Dock
- Provides power to repeater, which then “docks” to this base.
LCD Display
- Device to set up and operate system.
On prepped units, internal sensors have been installed in the tires, the dock has been connected to the
unit's power source and the repeater has also been installed in the dock. If the repeater is not already
installed in the dock, instructions are included to describe how to snap the repeater into the dock.
