Moving head light user manual
- 13 -
DMX address setting
Each fixture must set a specific starting address. When receiving signal transmission, fixture will receive channels
control signals which from the starting address.
According to different requirements or easy to use, the user can set many fixtures to the same address, also can set
up a separately address for every device.
If more than one fixtures set to the same address, all of them receive from DMX channels signal. All connections
fixtures are jointly controlled, controller can't separate control a device.
If each device set to a different address, each device will be separate from its particular set the starting address and
began accepting DMX512 control signal, so that more convenient separate control one of device. Using this method
must be based on channel quantity of device to determine a starting address.
This device have 16 channels, so the first device starting address set 1, second is 17(1+16), third is 33(17+16) and
so on.
Cleaning and maintenance
Cleaning should be performed every 15-day period, by using a sponge which is dipped with alcohol, rather
than wet cloth or other chemical liquid, to clean the mirror.
Cut off power before cleaning and maintenance!
CAUTION
Address33
Address 17
Address 01
