www.lc-group.ca
9
CHS3
（
Chase 3
）
INFO
（
Information
）
SOFT(Software
version)
Vx.x
POW(Power
reduction)
100%/80%/50%
LOAD(Load)
ST L
（
Setting
load)
YES/NO
PR L
（
Program
load)
YES/NO
SEND(Send)
YES/NO
Instructions
：
When enter to the “*” position displayed on the LED, the light will automatically set as master and send data to
external. Other fixtures can receive this data and will synchronously running without manually set as slave. When
power cycle it will jump to the “*” position and running again.
And in these position it will not return back to the
default display after two minites.
6.1 DMX ADDRESS SETTING
1) Press the
【
ENTER
】
button in
【
ADDR
】
menu, then enter to the DMX address setting.
2) Press the
【
UP/DOWN
】
button to select
【
1-512
】
numerical value.
3) Press the
【
ENTER
】
button to escape and save.
6.2 STATIC SETTING
1) Press the
【
ENTER
】
button in
【
STAT
】
menu, then enter to the static setting.
2) Press the
【
UP/DOWN
】
button to select
【
RED
】，【
GREEN
】，【
BLUE
】，【
AMBER
】
,
【
WHITE
】
,
【
UV
】
and
【
SHUT
】
.
3) Press the
【
UP/DOWN
】
button to set up the
【
0-255
】
numerical value.
4) Press the
【
ENTER
】
button to escape and save.
6.3 COLOR CAST CALIBRATION SETTING
1) Press the
【
ENTER
】
button in
【
CAL
】
menu, then enter to the color cast calibration setting.
2) Press the
【
UP/DOWN
】
button to select
【
RED
】，【
GREEN
】，【
BLUE
】，【
AMBER
】
,
【
WHITE
】
,
【
UV
】
3) Press the
【
UP/DOWN
】
button to set up the
【
0-255
】
numerical value.
