8
• Work only in good lighting conditions or ensure that adequate artificial lighting
is provided
• Prior to start of work, the operating personnel shall conduct a visual inspection of the
moving parts of the device for any signs of excessive wear or damage
• Do not use the device if there are excessively worn or damaged parts
• The device may be adjusted, serviced and cleaned only when the power supply
is disconnected
• Younger users (typically users under the age of 18) must be supervised at all times
• The replacement of damaged parts may be performed by authorized personnel; only
authorized spare parts may be used
• The device is intended for indoor use only
• Do not allow the device to run without supervision. If you have to leave the workplace,
always turn the device off.
6. Danger zone
7. General description of the product
7.1. Description of the use
(zone of increased risk of injury)
• The entire inside area of the device. Keep hands, hair, clothing and tools away from
the mechanism while it is in use.
The machine is primarily used to knead or condition polymer clay. The material is inserted
between the rollers and extruded/compressed by turning the crank. When the material
has passed through the mechanism, it can be folded in half and inserted again between
the rollers. This procedure is repeated until the material is sufficiently conditioned and supple.
Once the material is conditioned, you can alter its thickness by adjusting the offset between
the rollers.
