3)
Pressing “SETUP” to open the menu of the record parameter, where you can set the
timing of the record, the length of the record, brightness, saturation, contrast, color
etc.
4)
Use”■” to exit to preview menu.
Schedule recording
1) Adjust the DVR time to the current time.
2) On the main menu, press “SETUP” and enter RECORDING SETUP menu, then select
“schedule” to setup the schedule recording.
3) Press “right’ to select the schedule recording status, press “left” to delete the selection.
4) Press “up” or “down” to change the status.
5) Press “OK” to confirm the setup.
Note:
1. When you set the schedule recording, please don’t turn off the power, but chose standby
mode instead.
2. The recorded file will be saved in the folder MOVIE\REC as “REC xxxx. AVI” into the first
partition of the HDD. The “XXXX” is the file number which is increased automatically for the
saved file.
3. If the hard disk is full during the recording, the information will be shown as follows: ”The
disk is full! Press any key to exit”.
4. If the file size is more than 2GB or the recorded time more than 1 hour, there will be
another file to continue recording.
