-5-
UDOS 51E
–
Operator’s
Manual v1.6
The following parts are user replaceable and can be
ordered at
Remove the (4) four screws securing the handle to the
tool head housing. The handle can then be lifted straight
up to remove, disengaging the blocks at the rear of the
top housing. Installation is the reverse of removal.
Both the front and rear bumpers are replaceable in the
event they become worn or damaged.
The rear bumper is removed by unscrewing the (2) Phillips
head screws and then disengaging the bumper form the
tool by pulling it towards the rear of the tool. Installation
is the opposite of removal, noting the “F” indicators on
the bumper face forward toward the front of the tool.
Installation is the reverse of removal.
The front bumper is removed by unscrewing the (2) M3
hex head screws. Installation is the reverse of removal.
The follow parts are considered wear items and can be
replaced by an authorized service center:
Part Number
Description
Power Cord
Power Cord Strain Relief
Motor Brushes
To reduce the risk of injury,
unplug the tool before perform
any inspection and/or cleaning.
Inspection
Become familiar with the proper performance behavior of
the tool. Periodically inspect the tool for issues such as
undue noise, excessive vibration, misalignment or binding
of moving parts, breakage of parts, or any other condition
that may affect the tool operation. Return the tool to an
authorized service center for repair.
Cleaning
Clean dust and debris from vents. Keep handles clean,
dry and free of oil or grease. To avoid the risk of shock,
Do NOT spray cleaners directly on the tool. Instead apply
the cleaner to a cloth first, then wipe the tool. Use only
mild soap and a damp cloth to clean, since certain
cleaning agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household detergents
containing ammonia. Never use flammable or
combustible solvents around tools. To avoid the risk of
shock, Do NOT spray cleaners directly on the tool.
Instead apply the cleaner to a cloth first, then wipe the
tool.
Repairs
If repairs are needed, visit to
obtain a Return Authorization.
Lake Country Power Tools warrants its Professional
Power Tools for a period of one year from date of
original purchase. We will repair or replace at our
option, any part or parts of the products and accessories
covered under this warranty which, after examination,
provides to be defective in workmanship or material
during the warranty period, please contact LC Power
Tools/Customer Service at: 262-367-8395. Proof of
purchase may be required. This warranty does not apply
to repair or replacement required due to misuse, abuse,
normal wear and tear or repairs attempted or made by
other than an Authorized Service Station.
ANY IMPLIED WARRANTY. INCLUDING THE IMPLIED
WARRANTIESOR MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, WILL LAST ONLY FOR (1) YEAR
FROM THE DATE OF PURCHASE.
For information on warranty performance please write:
Part Number
Description
UDOS Backing Plate
Front Bumper
Rear Bumper
Small Handle
Medium Handle
Large Handle
MAINTENANCE
HANDLE REMOVAL AND
INSTALLATION
LAKE COUNTRY LIMITED ONE-
YEAR WARRANTY
USA & CANADA
BUMPER REPLACEMENT
WEAR PARTS
USER REPLACEMENT PARTS
