lbx V05, User Manual, Page: 6 / 32

6
•
Place the speed control knob at the lowest position. Put the instrument on a stable and safe
place and plug in the main power.
•
Push the two-direction switch right to the touch mode.
•
Turn the speed control knob to set speed.
•
If a test tube is pressed into the mixing head vertically, the instrument will begin to work and
the power LED will be lit.
•
Push the two-direction switch left gently to OFF.
Note:
• Place vessels as vertical as possible
into the center of mixing head for
proper mixing.
• Adjust the speed control knob slowly
in order to have the instrument works
smoothly.
• Don not run continuous operating
mode at high speed area.
6.
Maintenance and Cleaning
•
Proper maintenance can keep instrument working and extend its life time.
•
Do not spray the cleanser into the instrument when cleaning.
•
Unplug the power line when cleaning.
•
Only use cleanser as shown below:
Dyes Isopropyl alcohol
Construction
materials Water containing
tenside / Isopropyl
alcohol
Cosmetics Water containing
tenside / Isopropyl
alcohol
Foodstuffs Water containing
tenside
Fuels Water containing
tenside
Table 2