lbx INCR-070-001, User Manual, Page: 5 / 10

5
Controller operation instruction
ⅰ . Controller Specification
Temp. setting range: 0.0 - 60.0
℃
Timer setting range: 0 - 99minutes 59 seconds
Display error:
<
0.5%
Sensor ： PT100
ⅱ
. Instruction of panel
U P / L i g h t
I l l u n i a t i o n
S e t
D O W N / O p e a t e
Alarm
Refrigeration
Heating
Stop
8
3 0.0
Tem. testting number
Tem. setting number
℃
8
3 0.0
ⅲ . Temperature time operation
Example: Set temperature to 30 ºC, once reached, 5 hours later, stop the machine (T = 30 ºC. Timer = 5 h)
1. Click the set button to enter into the setting temp. condition, set the temp. at 30
℃
using up and down keys.
2. Click the set button, to enter the timer set condition, change the hours from “0” to “5” using up and down keys ,
once you need to set the minutes, also follow the above step.
When the timer is set to
“0”, it is means there is no timing function, and the incubator runs continuously.
When the timer is not set to “0” , when the inner chamber temp. reaches the set temp. the timer will initiate,
when the time ends, the machine will stop. When it stops, the light will turn on, the buzzer will tweet 30 seconds,
press the down keyboard for 4 seconds, the system will start working again, when the buzzer sounds, please
click any keyboard to stop the sound.
3. Illumination: click the illumination button and then it will turn on, click again and it will close.
Without timer setting With timer setting
ⅳ . Inner Chamber Specification setting
Press the set button for more than 3 seconds, the screen will show “LC” . Modify the number to “3” using up and
down keys, click the set button again to access the parameters. By clicking the set button, you can change
through the parameters in the next table and modify each specification, press the set button for 3 seconds to
exit the settings, the specification will be saved automatically. If during 30 seconds, no button is pressed, it will
exit settings automatically and will not keep the specification.
Alarm
制冷
Heating
停止
Stop
3 0.0
Tem. testting number
Tem. Setting number
运行时间
时间设定 时间设定
℃
3 00 .
报警
制冷
停止
温度设定值
定
Refrigeration
Alarm
Heating
Stop
3 0.0
Tem. testting number
Tem. Setting number
℃
3 00 .
Refrigeration
Alarm
制冷
Heating
停止
Stop
3 0.0
Tem. testting number
Tem. Setting number
运行时间
时间设定 时间设定
℃
Refrigeration
Alarm
Heating
Stop
3 0.0
Tem. testting number
Tem. Setting number
℃
Refrigeration
Alarm
05 00
: