Created for Smart Laziness
TROUBLESHOOTING
Q1 : I cannot log in to the web UI of the repeater.
What should l do?
Try the following solutions:
• If a WiFi device is used, ensure that your WiFi device is connected
to the repeater’s WiFi network NEXTBOX, and the Mobile Data (if any)
function is disabled. Don’t forget to include the http:// on the link.
• If a computer is used, ensure that your computer has connected to
the WiFi network NEXTBOX_EXT, and was set to Obtain an IP address
automatically and Obtain DNS server address automatically.
• Restore the repeater to factory settings, and try again.
Q2: How to restore the repeater to factory settings?
When the PWR LED of the repeater is solid on, press and hold the RESET
button on the repeater for 7 seconds using a paper clip, and release.
After the upper Signal LED turns off, the repeater is restored to the
factory settings.
Q3: The repeater cannot find the WiFi network Of my router.
What should I do?
The router may be encrypted with WEP or WPA/WPA (Enterprise)
algorithm. Change the encryption type of the router to WPA-PSK
or WPA2-PSK, and try scanning again.
