LaZee Tek
Computer Access Technologies
2 of 2
www.lazeetek.com
206-E
© 2018 LaZee Tek LLC. All Rights Reserved
8. With cursor positioned near left center of screen:
a. Repeat steps 6a – 6d steps raising
right
side of LaZee Mouse™ and verify proper
leftward cursor movements. (Fig 2)
b. Raise left edge half height of pencil & verify cursor moves about ~½ of full speed.
9. With cursor positioned near right center of screen:
a. Repeat steps 6a – 6d steps raising
left
side of LaZee Mouse™ and verify proper
rightward cursor movements. (If USB cable interferes, do this step with cable
protruding over the edge of flat surface or lift unit and estimate)
10. Raise any corner of the unit so the cursor moves in any direction. Press HOME and
verify the cursor stops.
11. Continue testing by raising each of the four corners & verifying proper diagonal cursor
movements.
12. Randomly tilt LaZee Mouse™ in any/all directions and verify smooth cursor movements
in all directions and speeds.
13. If all of these steps have been performed successfully, your LaZee Mouse™ is operating
properly. A unit that passes this procedure but has erratic performance during normal
use, many times has a loose or unsteady mounting.
14. If ANY of these steps failed, or if you have unresolved problems with operation during
normal use: contact LaZee Tek customer support for assistance.
If you have a unit that is not working properly we want to know about it, whether your
warranty has expired or not.
Full Speed
~Half Speed
Figure 2
Cable
