7
Assembly Instruction
1
Attaching the stem bracket
NOTE
: Do not fully tighten the bolts.
□
Place the chair seat (A) on a soft, non-abrasive surface carefully.
□
Attach the stem bracket (C) to the bottom of cross bar under the chair seat (A) by using M8 hex
bolt (AA). Sequence should be M8 hex bolt (AA), M8 washer (BB), steel plate (GG), Chair seat
(A), Stem bracket (C), steel plate (GG), M8 washer (BB), M8 lock washer (CC) and M8 nut
(EE).
□
Check the alignment and then tighten all the bolts and nuts with hex wrench (HH). Cover the
bolts with M8 PE caps (DD) and cover all nuts with M8 nut caps (FF).
