Page 4 of 5
Step3: Insert the connector ring (D) to the holes in panels (C), repeat step 2 attach the other panel(C)
to table leg (B) with M6 x 20mm hex head bolt (E), M6 washer (F). Tighten all bolts with hex
wrench (H). Cover all the bolts with bolt caps (G) (See Figure 3)
Figure3
Step 4: Then turn your table right side up. Place the glass (I) on the table rim (A). (See Figure 4)
Figure 4
Now your table is ready for your enjoyment!
