Page 4 of 4
Figure 2)
Step 7. Align the button with the hole in the Support Tube (A), press the button and lower umbrella until button
snaps through hole in support tube. (See Figure 2)
Step 8. Make sure button is locked in hole as show in detail.
Figure 2
Step 9. Slowly turn the handle of the Umbrella (B) clockwise until umbrella is completely open.
Figure 3
NOTE: This is not a free standing umbrella! See warnings below.
Warning: Never use umbrella without an umbrella base and matching table.
Always leave umbrella in down position when not in use.
Never use umbrella in high wind conditions. Damage to umbrella and /or table can occur.
