4
I
F
H
N
Step 3
Attach Seat Plate (D) to the bottom of the Seat Cushion (F)
(with the front of the seat plate facing the front of seat cushion).
Attach by using 1-1/2” Screws (I) for the front holes of the Seat
Plate (D) and 1” Screws (H) for the rear holes of the Seat Plate
(D) and tighten screws.
*Note: Tighten the screws completely.
Step 4
Insert Levers (D1 & D2) of Seat Plate (D) to the pre-attached
cable lever receivers on the underside of Seat Cushion (F). Push
down the key on the receivers to pull out the levers.
*Note: Fix the cable for the seat plate into the plastic clips
attached to the bottom of the seat cushion.
D
Insert
Push
Disassemble the lever
Assemble the lever
D
F
D1
D2
Summary of Contents for Commerical 2000 Series
Page 11: ......
