F
IGURE
6
F
IGURE
5
120 Volt Power Cord/
Power Supply Connection
Bronze Luxury-Lift
®
Power Recliner
Assembly Instructions
Bronze Luxury-Lift
®
Power Recliner
Assembly Instructions
(Assembly Instructions Continued)
9
8
7. Attach the outside back cover. The back tailgate upholstery cover attaches to the body using
fastening tape. Pull the outside back upholstery cover down tight and firmly press the fastening
tape on the outside back cover to the fastening tape on the bottom side of the rear rail. (F
IGURE
5).
8. Make the power supply connections with the following steps.
•
Remove power supply and 120-volt power cord from box and unwind cord.
•
Connect the 2-prong pin and blade motor connector located at the back of the unit to the power
supply. Align the motor connector to the power supply and push together until fully seated (F
IGURE
6).
•
Connect the 120-volt power cord to the power supply. Align the 120-volt power cord connector to
the power supply and push together until fully seated (F
IGURE
6). Do not plug in until instructed in
the
Operating Instructions.
9. Carefully remove the hand wand from between the arm and seat. Remove the packing material and lay
the hand wand across the seat, toward the front of the chair.
10. Proceed to the
Glide Adjustment Instructions
, followed by the
Battery Backup Assembly Instructions
.
Motor/Power
Supply
Connection
Electrical Parts
Power
Supply
120-Volt
Power Cord
Fastening
Tape
Fastening
Tape
Note: Fastening tape located on bottom
side of the body rear rail is not visible.
Rear Rail
