Page 4 of 5
Assembly Steps:
Step 1. Place the Seat (B) on the flat surface. Lay the chair back (A) across the arms of the chair seat (B). Lift the
chair back (A) at a slight angle and align the brackets on the chair back (A) with the brackets on the chair seat (B).
See Figure 3.
Figure 3
Step 2. Lower the chair back (A) onto the chair seat (B), making sure the chair back (A) and the chair seat (B) are
completely engaged. To make sure the chair back (A) is properly installed with both sets of back and seat brackets
engaged, stand behind the chair and pull the chair back (A). If one or both sides move out of position, the brackets
are not engaged. Remove the chair back (A) and repeat the step. See Figure 4.
Figure 4
Step 3. Put the Seat Cushion (D), Back Cushion (C), Pillow (E) and Foot Pad (F) on the recliner frame. See Figure 5.
A
B
A
C
D
B
Figure 5
