Lawson L47MP MKII, Operation Manual

Page: 2 / 11

CAUTION! The Lawson vacuum tube mic power supply
contains voltages exceeding 200 volts .
* Disconnect the microphone from the power supply before
removing or replacing Quick Change™ Capsules .
* Disconnect the microphone from the power supply before
changing the vacuum tube .
* Your Pelican case is water proof; your microphone is not . Do
not immerse your microphone in any water or liquid .
* Do not spray cleaners directly onto your microphone . Doing
so may damage the capsule . If you wish to clean the exterior
of your mic , spray Windex ( or similar cleaner ) onto a clean
towel and then wipe .
* The capsule is housed in a protective wire cloth head
assembly . Do not remove the capsule from its protective
housing . To do so may damage the diaphragms and void your
warranty .
* During the warranty period , repairs should be referred to
Lawson , Inc . After expiration of the warranty , for safety
reasons any repairs should be referred to Lawson , Inc ., or to
qualified service technicians .
Safety Precautions
Congratulations and thank you for purchasing Lawson
microphones featuring the versatility of QuickChange™
capsule ( s ). Lawson microphones are hand - crafted in the USA
by real people with pride to give you many years of service
and enjoyment .
To familiarize yourself with the special features of your
Lawson microphones , please take the time to read this
manual .
Your Lawson microphone ( s ) shipped from the factory
configured as indicated below:
Checked by:
???
Date:
xxxx.xx.xx
Vacuum Tube Microphone Serial Number:
???
FET Microphone Serial Number:
???
Introduction