V_pro8 Manual
V1.0/2
51
Operation (Web Browser Control)
Signal Routing
Signal Routing
One of the most common tasks is to change the signal routing of video and audio channels within
the
pro8
. The
main menus can be used to reassign video and audio signals
on a channel-by-channel basis.
Use this function to route a video signal to multiple outputs, embed new audio content into
an SDI output and/or convert audio between SDI and MADI formats.
Valid Channel Assignments
Signal routing is output-driven - first, you select the output you wish to re-assign, and then you
choose the new input(s):
For each SDI output, you can assign the video channel from any SDI input, and up to 16 audio
channels from any de-embedded SDI or MADI input. (Note that the embedded audio groups -
A, B, C and D - can be enabled or disabled from the
sub menu).
For each MADI output, you can assign audio from any de-embedded SDI or MADI input.
Default Signal Routing
The default routing, shipped from the factory, passes signals directly through the
pro8
:
SDI Inputs 1 to 8 are assigned to SDI Outputs 1 to 8
(video & audio).
MADI Input channels 1 to 64 are assigned to
MADI Output channels 1 to 64 for both MADI
ports.
This means that as soon as you connect video to your SDI inputs, you can preview these
signals from the
main menu (providing you haven't altered the
default video channel assignments).
