V1.0/2
28
V_pro8 Manual
Installation & Configuration
Web Browser Control
2.
Click on the
Login
button to log in to the system - the
button turns red, and the user interface
appear.
3.
To "log out", close your browser window.
If, at any time, the following message appears, then the browser has lost its connection to the
pro8
:
This may occur if the unit has lost power or its network communication, so check your physical
connections.
4.
Select
OK
and then click on the browser's
Refresh
button to reconnect - you are returned to
.
The user interface may appear to operate, even without a browser connection. This is
because the last known settings are cached into the browser's memory. When running
with live video and audio, it is usually obvious if the connection has been lost. However, if
you are working without signals present, and you close and ignore the "connection lost"
message, be aware that you are NOT controlling parameters within the
pro8
!
