mc²56 MKII Technical Manual
V5.10.2/1
249
Chapter 4: Service/Maintenance
Telnet Sessions
Telnet Sessions
Many parameters on the mc²56 MKII can be adjusted by opening a telnet session to the device's control system.
Warning
Adjusting parameters via telnet will make low level changes to your system. Therefore, these procedures
should
only
be performed by a fully trained member of staff.
To open a telnet session:
1.
Install a telnet client on your computer. We recommend using
Tera Term Pro Web 3.1.3
, a free telnet
client for Windows, which can be downloaded from
2.
Connect your computer to the device, via either the
network or service port (in the case of
an individual component).
3.
Configure the
on your computer's network interface card.
4.
Open the
Tera Term Pro
Telnet client.
5.
Select
TCP/IP
from the
Setup
menu, and add the
of your device to the host list:
6.
Now open a new Telnet connection using
File -> New connection
:
Summary of Contents for mc256 MKII
Page 1: ...Technical Manual mc 56 MKII Version 5 10 2 1 Edition 12 September 2017...
Page 350: ...mc 56 MKII Technical Manual V5 10 2 1 350 Chapter 7 Appendices Local I O Wiring...
Page 351: ...mc 56 MKII Technical Manual V5 10 2 1 351 Chapter 7 Appendices Local I O Wiring...
Page 352: ...mc 56 MKII Technical Manual V5 10 2 1 352 Chapter 7 Appendices Local I O Wiring...