LAWO mc256 MKII, Technical Manual

Page: 227 / 372

mc²56 MKII Technical Manual V5.10.2/1 227
Chapter 3: AdminHD
The Main Menus
Extras
·
Lock config - enable this option to lock the configuration and prevent accidental changes.
·
Parameter Box -> Comfort text edit mode or Stereo text edit mode - enable either of these modes
to use the naming short cut in the Signal 'Parameter Box'.
·
Parameter Box -> Replace all signal labels with default name - use this option to replace all Signal
Label fields with the defaults.
·
Parameter Box -> Replace all default HLSD classes with new Nework index - use this option to
reset the HLSD classes to the system network index (in a multi-system network). For example, if the
index = 2, then the resulting default HLSD classes (in/out) = B2R and B2S.
·
Show mapping table – opens an overview of the mapping tables 1 to 16.
·
Check configuration – checks the AdminHD configuration for programming errors.
·
Preferences – opens the AdminHD Preferences .