LAWO mc256 MKII, Technical Manual

Page: 198 / 372

mc²56 MKII Technical Manual V5.10.2/1 198
Chapter 3: AdminHD
Core Configuration: Parameters
Core -> Data
Core alias Enter an alias name for the Core .
Router module model
number
Router module type
These fields are for information purposes only and cannot be edited. They show the
serial number and type of
Router Module . The type of Router Module is defined
when you add a Core to the System (in the 'Core Browser').
Router module This box should always remain ticked, as every Core requires at least one Router
Module.
Redundant router
module Tick this box to add a redundant Router Module to the Nova73.
Redundant PSU Tick this box to add a redundant PSU to the Nova73.
Black burst synchronised
switching Tick this box to make matrix cross point switching synchronous to an external
Black Burst
sync source.
Internal sync activates
alarm Tick this box to activate the Global Alarm if the system switches to internal sync.
Enable sync port Tick this box to enable the multi-channel sync port. A pop-up appears asking you to
select the sync source, see
Multi-channel Sync .
Multi-channel sync port This box displays the multi-channel sync port source as a system address (if
Enable sync port is active).