mc²56 MKII Technical Manual
V5.10.2/1
189
Chapter 3: AdminHD
Online Operation
Online Operation
You should switch AdminHD online, in order to:
·
the status of your remote system.
·
the online configuration (in memory) - available for the Core configuration only.
Note that you will need a valid
between your computer and the mc²56 MKII control system.
Ø
To switch between modes:
1.
Click on
from the main
Online/Offline to remote system
). Or select
Remote
->
Online/Offline to remote system
(from the
).
Once online, AdminHD connects to and synchronises with the system. The IP address of the connected host is
displayed in the Status bar and the
If the connection fails, then the ‘
’ will report that the connection has timed out:
·
Check the
and
of your computer's network interface card.
·
Check that AdminHD is
with the mc²56 MKII system (the first three digits of the software
versions must match.)
·
See also the
2.
Click on the same button
, to switch offline.
3.
Select
Remote -> Reconnect mode
(from the
), if you wish AdminHD to reconnect to the
remote control system if
Summary of Contents for mc256 MKII
Page 1: ...Technical Manual mc 56 MKII Version 5 10 2 1 Edition 12 September 2017...
Page 350: ...mc 56 MKII Technical Manual V5 10 2 1 350 Chapter 7 Appendices Local I O Wiring...
Page 351: ...mc 56 MKII Technical Manual V5 10 2 1 351 Chapter 7 Appendices Local I O Wiring...
Page 352: ...mc 56 MKII Technical Manual V5 10 2 1 352 Chapter 7 Appendices Local I O Wiring...
