LAWO mc256 MKII, Technical Manual

Page: 118 / 372

mc²56 MKII Technical Manual V5.10.2/1 118
Chapter 3: AdminHD
Core Configuration: First Steps
File -> New
This menu option creates a new empty AdminHD session. It should be used before downloading data into a new
session, or to build a new configuration from scratch.
1. Select File -> New from the main menus, and choose the system you wish to configure:
Mixing Consoles:
·
mc
2
console - choose this option for a mc
2
56 or 66 mixing console.
·
mc
2
36 console or mc
2
36 console (96kHz) - choose one of these options for a mc
2
36 mixing console*.
Matrix:
·
Nova73 HD - choose this option for a Nova73 HD routing matrix.
·
Nova37 or Nova37 (96kHz) - choose one of these options for a Nova37 routing matrix*.
·
MicroCore or MicroCore (96kHz) - choose one of these options for a mc
2
MicroCore*.
* If you are building a new configuration from scratch for a mc
2
36 , Nova37 or MicroCore , take care to choose the
correct option for the maximum sampling rate (either 48kHz or 96kHz), as you cannot change this option later.
Note that the maximum sampling rate for a mc
2
console or Nova73 HD configuration is defined later when you
add the system Core.
2. If you have not closed your previous AdminHD session, then the following dialogue box appears - select
Yes to save the configuration (as a .csv file) before proceeding, or No to continue without saving:
The new configuration opens.