mc²36 xp Installation & Service Guide
Version: 1.0/1
6/59
3. Important Cleaning Instructions
3. Important Cleaning Instructions
Before cleaning your Lawo devices, please read and observe all of the following instructions.
Attention.
DO NOT spill liquids into any system components!
DO NOT clean the front panels or operational surfaces with sharp instruments
General Cleaning / Disinfecting Requirements
Lawo hardware products are made from a variety of different materials, and each material might have specific
cleaning requirements. Therefore, a general allowance for the disinfection of product surfaces with
disinfectants containing alcohol cannot be given.
Our front panels and operational surfaces are not entirely approved for treatment with chemical cleaning
agents and disinfectants. Component surfaces, buttons and electronics can be permanently damaged by
treatment with such agents and the lifespan can be dramatically shortened. Please note that some
substances can lead to discoloration of surfaces.
Lawo is not responsible for damage caused by the unauthorized use of disinfectants on our products and
surfaces. Damages caused by unspecified treatment of modules and components are not covered by regular
or extended warranties or SLA regulations.
This is a general instruction and recommendation for cleaning that applies to all Lawo products:
·
Before cleaning the device, unplug all external power sources.
·
Clean the device with a soft cloth, dipped lightly in warm to hot soapy water.
·
Do not use any liquid cleaning agents or spray cleaners that may contain flammable materials.
·
Do not get moisture into any openings.
·
Do not use aerosol sprays, bleaches, or abrasives.
·
Do not spray cleaners directly onto the item.
The above information and our technical application advice are given to the best of our knowledge.
Cleaning the Control Surface
To clean a Lawo control surface please use a cleaning cloth with the following properties:
·
Antistatic
·
Fluff-free
·
Without emery pieces