20
ASSEMBLY
Assembly Preparation
■
Carefully remove all contents from the product packaging.
■
Ensure you have all the accessories and tool(s) needed for assembly and operation. This also
includes suitable personal protective equipment.
■
Do not discard the packing material until you have carefully inspected and satisfactorily
operated the product.
Assembling the Blower Tubes
■
The nut (
j
) on the screw securing the front opening on the blower is pre-installed. Turn the nut
counter-clockwise using the spanner provided to suf
fi
ciently loosen it (Fig. 1).
■
Insert the upper blower tube into the front opening on the blower. Pay attention that the notch (
k
)
on the blower tube aligns with the middle of the upper part of the front opening. Make sure the
raised tab (
l
) on lower part of the blower tube aligns with the slot on the lower part of the front
opening. Insert the upper blower tube into place and secure the nut tight using the spanner
(Fig. 2 & 3).
■
Install the widest end of the lower blower tube onto the upper blower tube. Align the indexing tab
(
m
) with correct sized index channel (
n
); once achieved, turn clockwise to lock into place (Fig. 4).
■
Install the concentrator nozzle onto the lower blower tube. Align the indexing tab (
o
) with correct
sized index channel (
p
); once achieved, turn clockwise to lock into place. Make sure the blower
tubes and the concentrator nozzle are assembled securely into place. (Fig. 5 & 6).
NOTE:
The concentrator nozzle is optional. Assemble it when high air speed is required.
■
To remove the concentrator nozzle and lower blower tube, rotate the concentrator nozzle and
lower blower tube counter-clockwise to unlock them and remove.
■
To remove the upper blower tube, loosen the nut and remove the upper blower tube from the
front opening on the blower.
If any parts are damaged or missing do not operate this product until the parts are replaced. Use
of this product with damaged or missing parts could result in serious personal injury.
Do not attempt to modify this product or create accessories not recommended for use with this
product. Any such alteration or modi
fi
cation is misuse and could result in a hazardous condition
leading to possible serious personal injury. Only operate the blower fully assembled.
To prevent accidental starting that could cause serious personal injury, always remove the battery
pack from the product when assembling parts.
WARNING
WARNING
WARNING
NPTBL26A Manual GB-FR V1.4_20200428 avec modifs.indd 20
04/05/2020 11:44:41
