background image

22

TROUBLESHOOTING

Poor collection performance.

The mowing conditions are not 
optimal.

Cut long grass down in stages 
by gradually lowering the height 
of cut. Wait for wet grass to dry.

Mowing pattern is incorrect.

Mow in lines up and down the 
lawn. Do not swing side to side.

The blade fails to rotate.

The blade is blocked by grass.

Remove the grass.

The blade bolt is loose.

Tighten the blade bolt.

The mower vibrates at higher 
speed.

The blade bolt is loose.

Tighten the blade bolt.

The blade is damaged.

Replace the blade.

The motor shaft is bent.

Stop the motor, disconnect the 
power source, and inspect for 
damage. Have repair made by 

a qualified person.

TECHNICAL DATA

Voltage

Power

No Load Speed

Cutting Width

Cutting Height Adjustment

Grass Collection Box Capacity

Roller Size

Weight

Protection Type

Noise Level Specification (L

WA

 ) Guaranteed

Vibration (a

h

)

Protection Class

                                                                                           220-240V ~ 50Hz       

1800W

4200/min

36cm

12/19/26/33mm (4 Positions)

  26L

  50mm

8.38kg

IPX4

96dB(A)

<2.5m/s

2

  

/  II  

 

RECYCLING AND DISPOSAL

This marking indicates that this product should not be disposed with other household 

wastes. The machine must be delivered in rigid packaging to avoid damage during 

transportation. The packaging and the machine itself are manufactured from recyclable 

materials and should be disposed of accordingly.

Summary of Contents for MEH1836




























Reviews: