background image

13

cause cancer, birth defects, or other reproductive 

harm. Avoid starting the engine in closed 

unventilated spaces. 

9. MAINTENANCE & CARE 

AIR FILTER

• Accumulated dust in the air filter will reduce 

engine efficiency, increase in fuel consumption, and 

allow abrasive particles to pass into the engine. 

Remove the air filter as often as necessary to 

maintain in a clean condition.

 

• Light surface dust can readily be removed

by tapping the filter. Heavy deposits should be 

washed out in suitable solvent.

• Remove filter cover by loosening air filter cover 

knob.

ADJUSTING CARBURETOR

NOTE: Do not adjust carburetor unless necessary.

If you have trouble with the carburetor, see you a 

Service Dealer. Improper adjustments may cause 

engine damage and void warranty.

FUEL FILTER

• Fuel tank is fitted with a filter. The filter is situated 

at the free end of fuel pipe and can be picked out 

through fuel port with a piece of hooked wire or the

like.

• Check the fuel filter periodically. Do not allow dust 

to enter into fuel tank. Clogged filter will cause 

difficulty in starting engine or abnormalities in engine

performance.

• When filter is dirty, replace the filter.

• When the inside of the fuel tank is dirty, it can be 

cleaned by rinsing the tank out with petrol.

CHECK SPARK PLUG

• Do not attempt to remove the spark plug from a 

hot engine in order to avoid possible damage to the 

threads.

ORDERING REPLACEMENT PARTS

Please quote the following data when ordering

replacement parts:

• Type of machine

• Article number of the machine

• Identification number of the machine

• Replacement part number of the part required

10. DISPOSAL AND RECYCLING

The unit is supplied in packaging to prevent it being

damaged in transit. This packaging is raw material

and can therefore be reused or can be returned to

the raw material system. The unit is made of various 

types of material, such as metal and plastic. 

Defective components must be disposed of as 

special waste. Ask your dealer or your local council 

for guidance. 

11. WARRANTY

 

Subject to the following conditions, this unit is 

covered by a comprehensive two-year warranty. 

The unit is designed for domestic purposes only, 

issues and faults due to commercial use may not 

by covered by warranty. The warranty covers all 

manufacturing faults but excludes normal wear and 

tear, misuse, neglect, accidental damage or defects 

arising from failure to comply with instructions as 

outlined in this owners manual. Only genuine spare 

parts can be used for repairs and this must be 

carried out by an authorised LawnMaster Services 

Dealer to maintain warranty.

Warranty does not cover the cost of transportation of 

any part(s) but does cover the labour/parts cost 

incurred in repairing or replacing any defective 

part(s) consequential or special damages and / or 

expenses resulting from any defect.

If the unit requires further repairs or services please 

visit 

www.steelfort.co.nz

 to find your local service 

dealer.  

For all other enquries contact 

Steelfort Customer 

Se64 6 350 1350

Summary of Contents for LMCG260EH

















Reviews: