background image

5

switch or energising power tools that have 

the switch, on invites accidents.

4) Remove any adjusting key or wrench 

before turning the power tool on. A wrench 

or a key left attached to a rotating part 

of the power tool may result in personal 

injury.

5) Do not overreach. Keep proper footing 

and balance at all times. This enables  

better control of the power tool in   

unexpected situations.

6) If devices are provided for the 

connection of dust extraction and  

collection facilities, ensure these are 

connected and properly used. Use of 

dust collection can reduce dust-related 

hazards.

SAFETY 

• 

Your Brush Cutter is fitted with a 

harness. Carefully adjust the harness 

to fit comfortably and help to support 

the weight of the machine at your 

right side.

•  Identify the Quick Release mecha-

nism and practice using it BEFORE 

you start using the machine. It’s cor-

rect use may prevent serious injury in 

the case of an emergency. Never wear 

additional clothing over the harness 

or otherwise restrict access to the 

quick release mechanism.

•  For cutting ease and safety, approach 

the weeds being cut from the right to 

the left. In the event an unexpected 

object or woody stock is encountered, 

this practice could minimize the blade 

thrust reaction. Both hands must 

be used at all times to control this 

product.

WARNING

Some regions have regulations that 

restrict the use of the product. Check with 

your local authority for advice.

TRANSPORTATION 

AND STORAGE

Stop the machine and allow it to cool  

before storing or transporting. Do not 

store or transport the machine with   

batteries fitted, remove and secure  

separately.

Clean all foreign material from the     

product. Store it in a cool dry and well 

ventilated place that is inaccessible to 

children. Keep away from corrosive agents 

such as garden chemicals and de-icing 

salts. Do not store outdoors.

For transportation, secure the machine 

against movement or falling to prevent 

injury to persons or damage to the  

machine.

BRUSH CUTTER MAINTENANCE

WARNING

Use only original manufacturer’s  

replacement parts, accessories and 

attachments. Failure to do so can cause 

possible injury, poor performance and may 

Summary of Contents for LB4050002KIT





































Reviews: