INSTALL CUP HO
LDER
(1)
1
1.
Install cup holder
:
•
Open attachment bag
fi
nd 4 PCS M4x15 screw
and
fi
nd the cup holder (P) in packing box.
•
Install cup ho
l
der (P) to upper handle assembly
and lock screw.
1a
F
M
H
13
•
Do not insert battery until assembly is complete and you are ready to mow.
Failure to comply could result in accidental starting and possible serious personal
injury.
•
To prevent accidental starting that could cause serious personal injury, always
remove the battery from the product when assembling parts.
•
Never operate the mower without the proper safety devices in place and
working. Never operate the mower with damaged safety devices. Operation
of this product with damaged or missing parts could result in serious personal
injury.
UNFOLDING AND ADJUSTING HANDLE ASSEMBLY (2)
a. To raise handle assembly:
•
Pull up and back on the lower handle (F) until
it is aligned with the hole position of the arm
support and the mower housing.
•
To secure the lower handle (F) in place, lock
the lower screw (M).
•
Open the upper cam locks (H).
•
Pull up and back on the upper handle to raise
it into operating position.
•
To secure the upper handle in place, close the
upper cam locks (H).
NOTE: If the upper handle is loose or separated
from the lower handle, tighten the knobs on the
upper handle locks by turning them clockwise.
2a
P
