LawnMaster FD2401, Original Operation Manual

Page: 9 / 16

9
GB
A
1 Hopper
2 Pusher
3 Bag mount
4 Collection bag
5 Wheel
6 Chassis
7 Mains lead
8 Reset button
9 Housing interlock
10 On/Off switch
11 Handle
Technical Specifications
does not work properly. Always have a damaged
switch repaired by our a qualified technician.
• Only use extension cables that have been
approved for outdoor use and are resistant to
splash water.
The core diameter for extension cables
measuring up to 25 m must be at least 1.5 mm²,
and 2.5 mm² for cables longer than 25m. Always
roll the whole cable off the reel before use.
Check the cable for damage.
• Do not unplug the shredder by the cable. Keep
the cable away from heat, oil and sharp edges.
General Description
Functional description
The shredder has a powerful electric motor with
overload protection. Cutting is performed by a
system of blades. The sturdy chassis ensures a
stable standing position with good mobility.
Refer to the following descriptions for a functional
description of the controls. This appliance is not
intended for use by persons (including children)
with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Summary
Blade-type shredder.................................. FD2401
Nominal power intake................................ 2400 W
Nominal voltage........................ 230V-240V~ 50Hz
Safety class.......................................................... II
Degree of protection........................................ IP24
Idling speed........................................... 3940 min-
1
Volume of collection bag..............................….60 l
Weight............................................................12 kg
Branch thickness ................................max. 40 mm
Noise pressure level EN ISO 11201(LpA)...............
....................................... 98dB(A); KpA = 3,0dB(A)
Noise performance level EN ISO 3744 (measured)
/(LwA)….......................105dB(A); KwA = 2,0dB(A)
Noise performance level (guaranteed)........ 107dB
*Rated operation duty: P(40)
The machine shall periodically continuous operate
with load for 40s and then without load for 60s.
The max. branch thickness that can be shredded
is dependent on the type of wood and the quality
of the material being cut.
For hard wood (e.g. oak/beech branches), the
max. branch thickness that can be shredded is
less than for soft wood (e.g. pine/spruce wood).
For dry or knotted wood, the cutting thickness
may also be less.
The equipment is intended only for use in premises
in which the current bearing capacity of the
network is >=100 A per phase and which are
supplied by a distribution grid with a nominal
voltage of 230-240V.
To be on the safe side, check with your local
electric utility to verify that the junction point of
the mains has enough continuous current carrying
capacity for the unit.
Noise and vibration values were determined
according to the standards and stipulations
mentioned in the declaration of conformity.
Technical and optical changes can be carried
out in the course of further development without