LawnMaster CLMF4016K, Operator'S Manual

Page: 33 / 39

33
TROUBLESHOOTING
Mower is hard to push.
High grass and low
cutting height. Rear of
mower housing and blade
dragging in heavy grass.
Raise the cutting height.
Mower vibrates overly
and makes excessive
noise.
The cutting blade is not
assembled securely.
Tighten the blade bolts.
The blade is not balanced.
Sharpen and balance the blade
following instructions in this manual (see
page 28). Or replace the blade.
The motor shaft is bent.
Stop the mower and remove the battery.
Have the mower inspected and repaired
by an authorized service center before
restarting.