LawnMaster CLGT2425S, Instruction Manual

Page: 15 / 31

15
■ Align the battery pack with the slots on the charger. Slide the battery pack in until it locks into
place (Fig. 7).
■ Connect the charger to the power supply.
■ After the battery is charged, it is suggested that the charger be disconnected from the power
supply.
■ Press the release button on the battery pack and remove it from the charger.
NOTE: It is normal for the battery pack and the charger to become warm during charging process.
If the battery does not charge properly, check to make sure the electrical outlet is operational.
Always charge the battery before storage!
Use only with 24V Lawnmaster
®
HYCH0132400500B or HYCH0132400500G battery charger.
WARNING
OPERATION
Battery Pack Operation
The battery charger supplied is specifically designed for the lithium-ion battery used in this garden
appliance and may cause risk of fire if used with a non-compatible battery pack.
Check the power voltage! Battery chargers operate on 100-240V AC.
Ensure the battery is charged between 4°C and 40°C. This ensures an optimum battery service
life.
Protect the battery from heat, from continuous exposure to sun and keep away from radiation or
other heat sources. Do not leave the battery in the trimmer in direct sunlight over long periods.
The battery is supplied partially charged. To ensure full capacity of the battery, charge the battery
before using your appliance for the first time. The lithium-ion battery can be charged at any time
without reducing its service life. Interrupting the charging procedure does not affect the battery.
Charger Operation (See Fig. 7)
Use only with 24V Lawnmaster ® 24LB2004 or 24LB4005 battery.
If any part of the charger is missing or damaged, do not operate it! Replace the charger with a new
one. Failure to pay attention to this warning could result in possible serious injury.
Check the voltage! The voltage must comply with the information on the rating label.
WARNING