12
working position.
c
Loosen the screw (22) in the handle
and move the auxiliary handle (5) to
your favourite position. Tighten the
screw in the handle.
The telescopic shaft allows you to adjust
the appliance to your personal size.
d
Loosen the threaded bush
(8). Adjust the telescopic shaft (9)
to the correct length and tighten the
threaded bush.
Changing the cutting angle lets you trim
e.g. under benches or wall offsets.
e
Tread on the pedal (15) on the motor
housing and tilt the telescopic shaft
(9). There are 4 preset tilt angles (see
“Work instructions”).
The handle rod can be turned by 90° and
180° (see “Work instructions”).
f
Push down the lock (7) and turn the
handle rod
0° 90° 180°
(6) until it
snaps into your favourite position.
The spacer bow keeps the trimming as-
sembly away from plants and trunks not
to be cut.
g
Flap the spacer bow (11) down. When
the spacer bow is not in use you can
tip it back up into its parking position.
Manner of operation
• Do not cut moist or wet grass.
• Prior to starting the appliance,
check that the cutting disk does
not contact stones, gravel or
other foreign bodies.
• Switch on the trimmer before
you approach the grass that is to
be cut.
• Do not overload the trimmer dur-
ing operation.
• Avoid contact with obstacles
(stones, walls, fences, etc.) as
this will rapidly wear out the lines.
Cutting grass
Cut the grass by
swaying the trimmer
sideways to the right
and left. Cut slowly
while the trimmer is
tilted forwards by
approx. 30°.
Cut tall grass by a series of levels from
