background image

8

SYMBOL

SIGNAL

MEANING

DANGER

Indicates an imminently hazardous situation, which, if not 
avoided, will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation, which, if not 
avoided, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not 
avoided, may result in minor or moderate injury.

NOTICE

(Without Safety Alert Symbol) Indicates a situation that may 
result in property damage.

The following signal words and meanings are intended to explain the levels of risk 
associated with this product.

SERVICE

Service requires extreme care and knowledge and should be performed only by a qualified service 

technician. When servicing, use only identical replacement parts.

For troubleshooting or replacement, please call Customer Service for assistance (Toll free number 
866-384-8432).

To avoid serious personal injury, do not attempt to use this product until you read thoroughly and 
understand completely the Operator’s Manual.
If you do not understand the warnings and instructions in the Operator’s Manual, do not use this 
product. Call Customer Service for assistance (Toll free number 866-384-8432).

WARNING

SYMBOLS

Summary of Contents for CLGT2410H

































Reviews: