LawnMaster CLBC4009K, Operator'S Manual, Page: 19 / 26

19
OPERATION
CARE AND MAINTENANCE
WARNING
To Reduce The Risk Of Injury Or Damage:
• Always switch the product off, remove the battery pack and let the product cool down before
performing inspection, maintenance and cleaning work!
• Only perform repairs and maintenance work according to these instructions! All further works must
be performed by a qualified specialist!
• Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean
this product as they might be harmful to its surfaces.
• Wear safety gloves when working on the cutting device and close to it! Use appropriate tools to
remove debris e.g. a brush or wooden stick! Never use your bare hands!
• Wear safety gloves when working on the cutting device and close to it! Use appropriate tools to
remove debris e.g. a brush or wooden stick! Never use your bare hands!
• Always use original spare parts for replacement. The cutting device must be replaced by an
identification blade. Do not attach any other type of cutting device!
• Please consult the instructions for use supplied with the battery pack and charger for more detail.
Fig. 20
Replacing The Blade ( Fig. 20)
• Replace the cutting blade with a one of the same type when it is worn or shows damage.
Remove the battery before replacing the blade.
• Removing the worn or damaged blade
：
1. To lock the axle, push spindle lock rod (21) sideways into the hole provided on the motor housing
(12) and on the backing flange ( 19 ).
2. Unscrew the fixing nut(17) clockwise with the aid of the multi tool (20) and remove the locking
washer (16) and the brush blade (15).
• Refit the brush cutter blade to the spindle as described in section “Assembly – Brush cutter blade”.