Thank you for purchasing the Lawn Star Hedge Trimmer which is one of the finest and most advanced
hedge trimmers today’s technology can produce. Before you begin using it, please read this manual
carefully and familiarise yourself with the control and the proper use of this product to ensure you get
the best possible performance from it.
SAFETY PRECAUTIONS
Inspect your hedge trimmer and its supply/extension cable before each operation. If any part is
damaged or worn, repair or replace before operation. Do not operate with damaged or tangled
supply/extension cable. Keep cable away from cutting blades.
Use only genuine Lawn Star (Pty) Ltd. replacement parts when servicing or repairing the unit. These
parts are available from your supplying dealer or service agent.
WARNING : To prevent electrical shock hazards, use only extension cables suitable for outdoor
use, with splash-proof socket outlets, preferably protected by sensitive Residual Current Device
(RCD) with tripping current of not more than 30 mA.
Disconnect the unit from the power supply when unattended or not in use.
Disconnect the unit from the power supply for cleaning, blade oiling or when the blades are blocked
or any object is to be removed from the blades.
Check regularly that all screws are properly secured. Check the cutting blades regularly and if they
are damaged have them repaired or replaced by an authorised service agent or dealer.
It is essential that the operator wears safety goggles, protective clothing and sturdy, non-slip
footwear.
Make sure the safety shield is always mounted when using the hedge trimmer. Never remove
any of its components and never use a damaged or incomplete machine. Never modify any of
the machine components.
Do not use your hedge trimmer for any jobs other than those for which it was intended. Do not force
your trimmer. If motor labours, pull away from hedge, bushes and shrubs.
Use care in picking up or holding the unit. Do not grasp the cutting blades or carry the hedge
trimmer by taking hold of the blades.
Hold the hedge trimmer firmly with both hands during operation.
Avoid unintentional starting. Do not carry a plugged-in unit with your fingers on the switch. Inspect
the area to be cut and remove all debris that could be entangled in the cutting blades.
Avoid dangerous environments. Do not use the unit in poor light or in damp or wet locations. Do not
use in the rain. Do not use on steep slopes, especially if damp. Work across slope faces, not up and
down. Do not over-reach. Ensure good footing and balance are maintained.
Keep hands and feet clear of the cutting blades while unit is in use. Cutting blades continue to
reciprocate for 0.5 seconds after switch-off.
Do not allow children under 16, nor anyone who is not familiar with these instructions to use the
hedge trimmer. Children, pets and onlookers should be kept at least 15 meters away from the work
area, unless shielded by an effective solid barrier.
When not in use, store the unit indoors in a dry and locked place, out of reach of children.
PREPARATIONS FOR USE
Remove the safety blade cover by sliding it off the blade (Fig.2)
Make a loop in the extension cord and hook into the strain relief mechanism (Fig.3)
Connect the plug provided with the hedge trimmer to a suitable female socket on an extension cord
not more than 40 meters of length. Use 2-core insulated cable, minimum (HO5VV-F) 2x1,0mm , in
turn connected to a suitable mains connection plug. All components should meet your national, IEC
or EN specifications.
THE USE OF THIS TRIMMER FOR COMMERCIAL OR RENTAL PURPOSES WILL
INVALIDATE THE WARRANTY.
