LAWN STAR LSGS 2800 Operating Instructions Manual Download Page 2

 

Thank you for purchasing the Lawn Star Garden Shredder which is one of the finest and 
most  advanced  shredders 

today’s  technology  can  produce.  Before  you  begin  using  it, 

please read this manual carefully and familiarise yourself with the control and the proper 
use of this product to ensure you get the best possible performance from it.   

 

SAFETY PRECAUTIONS 

 

  Read the operating instructions and act accordingly. Keep the operating instructions 

for future reference. 

  Obey all safety instructions and warnings. 

  Do not allow children under the age of 16 years, nor anyone who is not familiar with 

these instructions to use the garden shredder. Do not operate this appliance if under 
the influence of alcohol, drugs, or medical preparations. 

  Children, pets and onlookers should be kept away from the work area, unless 

shielded by an effective solid barrier. 

  Always position the shredder on level, horizontal, solid and dry surfaces so that it is 

stable. Do not stretch towards the shredder. 

  Always wear safety goggles, protective gloves and clothing including sturdy, non-slip 

footwear. 

  Keep body parts and loose clothing away from the cutting blades. Do not put your 

hand into the hopper or the discharge chute. 

  Only operate this shredder once correctly and fully assembled. 

  Do not pull the shredder using the cable or place any stress on the cable. 

  Inspect your garden shredder and its supply/extension cable before each operation. If 

any part is damaged or worn, repair or replace before operation. If cable becomes 
damaged during use, disconnect from power supply immediately. Do not touch the 
cable before disconnecting the supply. 

  Use only genuine Lawn Star (Pty) Ltd. replacement parts when servicing or repairing 

the unit. These parts are available from your supplying dealer or service agent. 
Repairs may only be performed by authorised service agents. 

  Switch the device off, disconnect the plug and wait for the cutting blades to come to a 

complete standstill before servicing, cleaning, transportation or storage. 

  Disconnect the unit from the power supply when unattended or not in use. When not 

in use, store the unit indoors in a dry and locked place, out of reach of children. 

  Mains connection: The mains voltage and the kind of current must correspond to that 

specified on the 

specification label

 on the product. 

  WARNING : To prevent electrical  shock hazards, use only extension cables suitable 

for outdoor use, with splash-proof socket outlets protected by a sensitive Residual 
Current Device (RCD) with tripping current of not more than 30 mA. 

  Extension cords may not exceed 35 m in length and must have wires with a minimum 

cross-section of 1.5 mm2 

  Stop the motor and disconnect the plug from the mains if the shredder becomes 

blocked. 

  Never remove any of its components and never use a damaged or incomplete 

machine. Never modify any of the machine components. 

  Always ensure all handles and guards are fitted when using the shredder. Ensure all 

screws and nuts ar

e properly tightened before use, except the “pressure plate 

adjusting screw” (Fig.10 & Fig.11) which is factory set. 

  Do not use your garden shredder for any jobs other than those for which it was 

intended. 

  Do not move the machine when the motor is running. 

Summary of Contents for LSGS 2800












Reviews: