21
Warning!
Releasing the starting rope suddenly may allow the rope to whip around
and cause injury and/or damage the recoil starting mechanism. When
starting the engine, firmly grasp the recoil starter grip; do not grasp the
starter rope itself. Always control the rope as it rewinds into the housing.
6. Hold the equipment firmly with one hand on the shaft tube (13). With the other hand, pull the starter
cable several times on the starter handle (3) until the engine starts. Pull the recoil starter grip slowly
to engage the starter, then give a short, quick pull.
• After starting, move the choke lever to the “OPEN” position gradually.
• If the engine fires only briefly and stops, move the choke lever to the “OPEN” position.
• Repeat the recoil start until the engine start.
After starting, run the engine at the idling speed for a few minutes. (see “Warming up”)
Caution! Do not pull the starter cable out too far – risk of breaking!
7 Lift up lever type
Summary of Contents for FW53E
Page 30: ...30 TROUBLESHOOTING...