Adjusting the Cutting Height
Adjusting the cutting height may bring you into
contact with the moving blade, causing serious
injury.
•
Stop the engine and wait for all moving parts
to stop.
•
Do not put your fingers under the housing
when adjusting the cutting height.
If the engine has been running, the muffler will
be hot and can severely burn you. Keep away
from the hot muffler.
Adjust the cutting height as desired. Set all four wheels
to the same height.
Note:
To raise the mower, move all 4 cutting height
levers forward; to lower the mower, move them rearward
(Figure 14).
Figure 14
Adjusting the Upper Handle
Height
You may raise or lower the upper handle to a position
comfortable for you.
Note:
You cannot raise the upper handle higher than
the angle of the lower handle.
1. Loosen the upper handle knob (Figure 15).
Figure 15
2. Move the upper handle to the desired position
(Figure 16).
Figure 16
3. Tighten the upper handle knob as tight as you can
(Figure 17).
Figure 17
8
Summary of Contents for Insight Platinum 10765
Page 19: ...Notes 19...