6
3352-964 Rev B
Checking the Engine Oil Level
1.
Remove the dipstick, wipe it clean, and insert it
into the filler hole,
but do not screw it in.
A
m-7977
m-7976
2.
Remove the dipstick and check the oil level. If the
oil level is below the
upper limit mark
(A) on the
dipstick, add oil into the oil fill tube until the oil level is
up to the mark.
Do not overfill.
(Max. fill: 0.58 quart
(0.55 l), type: SAE 10W-30 or SAE 30W detergent oil
with an API service classification of SH, SJ, SL, or
higher.)
3.
Install the dipstick securely.
Adjusting the Cutting Height
Warning
Adjusting the cutting height may bring you into contact with the moving blade, causing
serious injury.
S
Stop the engine and wait for all moving parts to stop.
S
Do not put your fingers under the housing when adjusting the cutting height.
Adjust the cutting height
as desired. Set all four
wheels to the same
height.
Note:
To raise the
mower, move all 4 cutting
height levers forward; to
lower the mower, move
them rearward.
m-7976
m-7922
Summary of Contents for Insight 10697
Page 17: ...17 3352 964 Rev B ...
Page 18: ...18 3352 964 Rev B ...
Page 19: ...19 3352 964 Rev B ...