8
Installing the Discharge Chute
Model 28225 only
1. Place the chute handle over the chute ring (Fig. 6).
m-3277
2
1
6
3 4
5
Figure 6
1.
Carriage bolt (3)
2.
Chute ring
3.
Discharge chute
4.
Chute handle
5.
Washer (3)
6.
Locknut (3)
2. Insert the discharge chute between the chute ring and
the chute handle. (Fig. 6).
3. Align the hole in the back of the chute with the center
hole in the ring.
Note: You can rotate the chute ring for easier
assembly.
4. Install a carriage bolt, a washer, and a locknut through
the center holes, with the washer and the locknut on
the outside.
5. Install the carriage bolts, the washers, and the locknuts
through the remaining holes, with the washers and the
locknuts on the outside.
6. Tighten all locknuts securely.
Models 28226 only
1. Set the discharge chute over the chute ring (Fig. 7).
2
1
636a
Figure 7
1.
Discharge chute
2.
Chute ring
2. Align the hole in the back of the chute with the center
hole in the ring (Fig. 7).
3. Install a screw, a washer, and a locknut through the
center holes, with the locknut on the outside (Fig. 7).
Note: You can rotate the chute ring for easier
assembly.
4. Install the screws, washers, and locknuts through the
remaining holes, with the locknuts on the outside.
5. Tighten all locknuts securely.
Installing the Chute Crank
Model 28226 only
1. Insert the flattened end of the chute crank through the
hole in the shroud while aligning the mounting bracket
with the holes in the lower handle (Fig. 8).
893
635
3
1
2
4
5
Figure 8
1.
Chute crank
2.
Mounting bracket
3.
Gear
4.
Plastic bushing
5.
Hidden gear opening
2. Slowly rotate the crank until the flattened end fits into
the hidden gear opening and the chute ring turns with
the crank (Fig. 8).
3. Fully insert the plastic bushing into the hole in the
mounting bracket (Fig. 8).
4. Secure the mounting bracket to the handle with 2
screws and locknuts (Fig. 8).
