Figure 23
3. Move the choke/throttle lever to the Choke
position (Figure 18).
4. Hold the blade control bar against the handle and
pull the recoil starter once or twice (Figure 24).
Note:
Pull the recoil start handle lightly until you
feel resistance, then pull it briskly.
Figure 24
1.
Recoil start handle
5. Move the choke/throttle lever to the Fast position
6. Hold the blade control bar against the handle and
pull the recoil starter (Figure 24).
7. If the mower does not start in 1 or 2 pulls, repeat
Note:
If the mower still does not start, contact an
Authorized Service Dealer.
Stopping the Engine
Service Interval:
Before each use or daily
To stop the engine, release the blade control bar
(Figure 25).
Important:
When you release the blade control
bar, both the engine and blade should stop within
3 seconds. If they do not stop properly, stop
using your mower immediately and contact an
Authorized Service Dealer.
Figure 25
1.
Blade control bar
13
Summary of Contents for 22270
Page 27: ...Notes 27...