and attach the cable end to the throttle lever on the
engine (Figure 6 and Figure 8).
Figure 8
1.
Attach cable end here
3.
Throttle cable
2.
Cable clamp
8. Adjust the throttle cable by doing the following:
A. Set the throttle control to the Fast position
Figure 9
B. Remove the air cleaner cover to see the throttle
on the engine more easily (Figure 10).
Figure 10
C. Move the throttle lever on the engine until
the throttle lever just touches the choke lever
(Figure 11).
Figure 11
1.
Set screw
3.
Throttle lever
2.
Choke lever
D. Tighten the set screw (Figure 11).
E. Install the air cleaner cover.
9. Install the back cover with the two screws you
removed in step 2.
8
Summary of Contents for 22270
Page 27: ...Notes 27...
