g024070
Figure 3
1.
Handle knob (2)
Important:
Route the cables to the outside
of the handle as you unfold the handle
(
g025928
Figure 4
Electric-start model shown
1.
Cables
3.
Handle
2.
Wire harness
(electric-start model only)
2.
Move the handle to the operating position
(
).
3.
Install the handle knobs and tighten them firmly
by hand until they are completely tight against
the handle.
2
Installing the Recoil-Starter
Rope in the Rope Guide
No Parts Required
Procedure
Important:
To start the engine safely and easily
whenever you use the machine, install the
recoil-starter rope in the rope guide.
Hold the blade-control bar to the upper handle and
pull the recoil-starter rope through the rope guide on
the handle (
).
g003251
Figure 5
1.
Recoil-starter rope
2.
Rope guide
6
