
(2) The charger is not intended for use by young children or infirm
persons without supervision.
(3) Ensure young children are supervised so they do not play with
the charger.
(4) During operation care should be taken to ensure that the
appliance has adequate ventilation to allow the cooling fan to be
effective – ENSURE THE CHARGER IS NOT COVERED
WHEN IN USE.
(5) Ensure the charger is not exposed to rain, water or humid
places.
(6) Ensure that the batteries to be charged and the voltage output
value are compatible. The charger should only be used on
sealed lead acid batteries (SLA) and gel type sealed lead acid
batteries. Failure to do so may result in an explosion.
(7) The operator is responsible for following these procedures and
failure to do so shall indemnify the Manufacturer, Importer or its
agents from liability or any responsibility for any occurrence that
may result as a consequence.
3. Operating Procedures
(1) Ensure the AC power switch is in “off” (O) position until the
charger has been connected to the supply and the battery.
(2) Ensure that the output end of charger corresponds with the
positive/ negative terminals of battery.
(3) Having observed the precautions before turning on and the
steps above, turn on the AC power switch to position (I). The
LED will come on indicating the power is on.
17
Summary of Contents for Bronco
Page 1: ...Owners Manual ...